WSP500 RESIN AND ACTIVATOR

WSP500

RESIN AND ACTIVATOR

WRAP SEAL PLUS RESIN AND ACTIVATOR

FEATURES:

Corrosion barrier and isolator
High adhesion strength
Excellent alkali and acid resistance
Easy of application by using paint rollers and paint brush
Applicable for pipes, tanks, and large surfaces

APPLICABLE MATERIAL:

Galvanized steel
Copper
Stainless steel
Carbon steel
Concrete
Polyethylene
FRP/GRE

CHEMICAL RESISTANCE:

MEK
Diesel
Ethylene glycol
Ammonia
Acetone
Crude oil
Toluene
Ethyl alcohol
Gasoline
Sodium hydroxide

WORKING TIME: 10 minutes at 30 °C (86 °F)
CURING TIME: 2 hours at 30 °C (86 °F)

APPLICATION:

Applied as corrosion coating on pipes, storage tanks, vessels, exhaust lines, bulkheads, machinery, joints, and large surfaces.
Applied with Wrap Seal PLUS Un-coated Fiberglass Tape, Chopped Strand Mat or Surface Tissue for reinforcement, bonding and lamination

TECHNICAL DATA:

Colour – Resin : Natural

Activator : Straw colour

Viscosity : 20000 – 40000 cps at 21 °C (70 °F)

Specific gravity : 1.85

Compressive strength : 24500 psi (1723 kg/cm2)

Tensile strength : 35000 psi (2461 kg/cm2)

Bond strength : 500 psi (35 kg/cm2)

Flexural strength : 42000 psi (2953 kg/cm2)

Flexural modulus : 1.6×106 psi (112491 kg/cm2)

Barcol hardness : 40 – 50 Shore D

Coverage area (per set) : 0.15 m2 at 3 mm thickness

APPLICABLE INDUSTRY:

WRAP SEAL PLUS CORROSION REPAIR PROCEDURE:

1. 1. Corroded pipe surface

2. 2. Roughen the area to be repaired

3. 3. Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed

4. Apply two coats of activated resin evenly over the area to be repaired and allow to cure

5. Immerse Wrap Seal PLUS Fiberglass Repair Tape into water

6. Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length

7. Discard the plastic tube at the end of the roll

8. Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

FLAT SURFACE/TANK

Apply Several layers of wrap Seal PLUS Surface
Tissue or Wrap Seal Plus Chopped
Strand Mat onto the affected area

Note:

Pembelian bahan Kimia ini harus melampirkan Company Profile (CV atau PT), Perorangan tanpa Identitas perusahaan tidak akan dilayani.

#tokokimiabatam, #bahankimia, #kimiabatam, #chemicalsbatam, #cleaningchemicals, #floorcaremaintenance, #floorchemicals, #floorfinish, #alkalinecleaner, #superkleen